Now, Seymour Duncan introduces the SHPR-2b P-Rails® Hot, delivering the same tonal flexibility as its predecessor, but specifically designed to provide a punchier, more aggressive tone in the bridge position. The P-Rails Hot features a beefed up coil wind and 2 powerful Alnico 8 magnets, which rival ceramic magnets in power but maintain the sweet sustain Alnico is known for. The P-90 coil in the P-Rails Hot is wound with a special wire type, selected for output and clarity. This P-90 is loud! The rail mode is hotter thanks to the power of the Alnico 8, and the series humbucker mode is huge!
P-Rails Hot are a direct humbucker retrofit and can be used in any guitar set up for a traditional humbucker or Trembucker spacing. To maximize P-Rails Hot’s unique splitting capabilities and get the most tonal versatility, it is recommended for use in tandem with a standard P-Rails in the neck position with a two-way switch (push-pull or mini-toggle) to get both humbucker and P-90 tones. Use a three way switch (DPDT on-off-on) to bring in the single coil Rail tones. Or for the ultimate in versatility, use Seymour Duncan’s Triple Shot switching mounting ring.
P-Rails Hot is recommended for all styles of music. They are built in the USA at the Seymour Duncan factory, come with black, white or cream covers.